Eriez equipment, either as individual units or complete systems, is designed
for the most efficient and economical processing of municipal solid waste,
comingled recyclables, shredded automobiles, electronic scrap, glass cullet,
plastic (PET), foundry sand and many other resource recovery operations.
Recycling Industry Equipment:
ProSort Airless Metal Recovery Systems
Superior metal recovery at a fraction of the cost to operate and maintain an air
driven sorter.
FinesSort Fines Metal Recovery System
Eriez' new FinesSort™ Metals Recovery System is the ultimate in fine particle
metal reclamation FinesSort's series of powerful magnetic components recover
valuable ferrous and non-ferrous metals from the fines waste stream in scrap
yards. This system not only reduces the amount of waste destined for landfill,
but reclaims thousands of pounds of metals per day.
Eddy Current Separators - Recycling Industry
Ideal for material recovery facilities wishing to automate removal of non
ferrous metals from trash, msw, sand, glass, dirt, CTD, electronic scrap, and
shredded automobiles. Available in feed widths of 24, 36, 48 and 60 inches (610,
914, 1220, and 1524 mm).
Suspended Magnetic Separators - Recycling Industry
Automatically remove ferrous from nonferrous materials conveyed in deep burdens
on almost any type of conveyor or chute. Ideal for separation applications on
wet or dry, fine or coarse materials.
Mechanical Feeders - Recycling Industry
Low-horsepower, high-capacity mechanical feeders handle bulk materials in
volumes up to 2250tph (2040mtph). Low-profile, requires minimum headroom.
Simple, stable, variable controller. Wide variety of trough sizes and types
available.
Vibratory Feeders - Recycling Industry
Eriez offers a complete line of vibratory equipment to convey, screen, and feed
materials in quanities rangining from a few spoonfuls to tons per hour. If the
many standard systems available are not quite right for your operation, Eriez
Magnetics Technical Center can develop custom-designed vibratory and screening
equipment to precisely meet your needs.
Magnetic Drum Separators - Recycling Industry
Designed for the removal of ferrous material from shredded automobiles, bottom
ash, slag and other recyclable scrap including chips, turnings and stampings.
Models available with permanent, rare earth, and combined permanent and
electromagnetic circuits, crisscross or agitator-type magnetic fields, and heavy
duty construction. Drum designs in many diameters and widths.
Drum Separators - Recycling Industry
Eriez Rare Earth Drum Separators effectively collect fine ferromagnetic and
paramagnetic materials in ore treatment operations. Powerful permanent magnets
enable more efficient separation performance for a broader range of application
than ever before.
Metal Detectors - Recycling Industry
Eriez manufactures the broadest range of metal detectors in the industry.
Whether looking for small ferrous or nonferrous metal pieces, tramp metal or
digger teeth, we can provide you with a metal detector to solve practically
every metal contamination problem. Contact us for our assistance in selecting
the appropriate metal detector for your application.
Conveyors - Recycling Industry
Mechanical Conveyors are highly efficient, single-mass conveyors, and are
designed to move light loads of bulk material reliably and economically. A wide
range of models are available to move products.
Electromagnetic Pulleys - Recycling Industry
Removes large & small tramp from nonmagnetics. Powerful magnetic pulleys are
used for effective separating heavy tramp iron and fine iron contaminants from
conveyor transported materials.
Magnetic Pulleys - Recycling Industry
Eriez interpole magnetic field attracts iron from nonmagnetic materials conveyed
on a belt. Easy installation. Self-cleaning operation. Industry-leading magnetic
field strength. Eighty combinations of diameters from 8 to 36-inches (203 to
914mm) and belt widths from 8 to 60-inches (203 to 1524mm). Permanant and
electromagnetic units are available.
DF High Speed Drum - Recycling Industry
Dry Low Intensity Magnetic Separators (DLIMS) for automatic continuous
concentration of magnetic ores, removal of magnetite from fly ash, purification
of ground slag, foundry sand, cement and minerals.
High Intensity Dry Magnetic Separator - Recycling Industry
New, stronger permanent magnetic separators for purification or concentration of
weakly magnetic materials.
Electrostatic Separator - Recycling Industry
Electrostatic separation relies on the difference in surface conductivity of the
materials to be separated. Conductive and nonconductive particles such as
chopped wire and computer scrap can be efficiently separated.
Magnetic Traps - Recycling Industry
Traps are used to purify products in liquid and slurry lines by removing small
particles of scale, oxides and iron contaminants. Easy to inspect and clean. Six
different models. Rare Earth elements available.
Pulley-Type Separators - Recycling Industry
A PT (Pulley-Type) Separator, whether standard or special, may well provide the
answer to a difficult separation problem requiring the use of a magnetic pulley.
Demagnetizing Coils - Recycling Industry
These Electromagnetic Demagnetizing Coils have been specifically designed to
give many years of maintenance-free service for demagnetizing natural magnetite
flowing through pipelines following recovery by a magnetic separators.
Wet Concentration - Recycling Industry
Eriez line of wet concentrators offer unique systems for the concentration or
classification of coal, iron ore and industrial minerals using a modified
hindered-bed approach. The hindered-bed concentration method used in the
Crossflow or Hydrofloat Separator provides an economical and efficient means of
sizing material such as sand and phosphate. The CoalPro column flotation cell
provides an innovative design providing low operating cost, low maintenance cost
and no aeration pumps. Eriez provides a full range of column flotation services
from evaluative studies through equipment design, fabrication and commissioning.
Wet Drum Separator-Model CDA - Recycling Industry
For automatic, continuous recovery of magnetite or ferrosilicon in heavy media
operations and concentration of ferrous and weakly magnetic ores.
Wet Drum Separator-Model HMDA - Recycling Industry
Eriez Model HMDA Wet Drum Separators improve the efficiency and reduce the costs
of media recovery in heavy media operations.
WHIMS Separator - Recycling Industry
For high capacity, continuous removal or concentration of feebly magnetic
materials. WHIMS separators with capacities up to 120 tph have been
custom-designed for applications where high intensity magnetic separation can do
the job most economically.
Magnetic and Eddy Current Separator Duo
Need to reliably separate aluminum flakes from polyethylene terephthalate (PET)
at your facility?
Electric Rotary Vibrators - ERV Series
This broad range of rugged mechanical vibrators will handle practically all
application needs. They provide an effective driving force for vibratory
screeners, feeders and conveyors.
* For more information, contact Frontline Process
